Patching & Levelling
Concrete Hardener
Chemically hardens concrete floors
Description
A clear flurosilicate solution that case hardens poorly-cured cement masonry structures by impregnating into its capillary spaces and then by chemically reacting with the free lime it bonds and strengthens the crystalline structure.
Features
- Easy to apply - sweep or brush on with a broom, mop or squeegee
- Permanently case hardens dusty or soft concrete or cement base structures by up to 300% of untreated concrete
- Dustproofs by bonding and strengthening the cement’s crystalline structure
- Substantially increases the chemical and abrasion resistance
- Seals the structure against moisture penetration
Cure & Seal
Chlorinated rubber curing compound
Description
A chlorinated rubber based compound for curing and sealing concrete surfaces.
Features
- Will accommodate bond of most carpet and vinyl adhesives.
- Seals the surface against dusting and oil stains.
- Provides abrasion and chemical resistance to the concrete surface.
Feather Floor
Trowel applied finishing underlay
Description
A cement based rapid setting trowel applied finishing underlay designed to smooth ridges, grooves, joins and gaps in the floor. Apply 0-3mm thick prior to installing a floor covering.
Features
- Exceptional bond strength
- No primer required
- Can be feather edged
- Rapid setting
Level Floor Standard
Self levelling flooring compound underlay for tiles and timber
Description
A resin modified, fast setting cement based compound for use as an underlay and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish.
Features
- Feather edge to 50mm thick
- 40Mpa strength
- Rapid set
Level Floor Tuff
Self levelling flooring compound for warehouse and external concrete
Description
A resin modified, fast setting cement based compound for use as a levelling compound and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish.
Features
- Feather edge to 15mm thick
- 100Mpa strength
- Water resistant - rapid set
Level Floor V15
Smooth, sandable, self levelling underlay for carpet & vinyl
Description
A resin modified, fast setting, chemical cure, cement based compound for use as an underlay and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish.
Features
- Apply floor coverings in 15 hours
- Apply feather edge to any thickness
- 60Mpa strength
- Chemical cure - rapid set
- Cold temperature cure at 5˚C
- Not suitable for wet areas
Non-Shrink Grout
Expanding grout
Description
A premixed, non-shrink class A cement grout. An expanding non-ferrous grout consisting of a dry, premixed blend of Portland cement and graded, siliceous aggregate with set regulating and reactive chemical agents.
Contains no calcium chloride.
Features
- Controlled expansions, ensuring positive surface contact
- No corrosive effect caused by metallic residue
- No rusting or staining on exposed edges
- Premixed, addition of water only needed
Patch & Anchor
Fast setting patching compound
Description
A fast setting, non-shrink, polymer modified cement patching and anchoring compound for concrete, cement render, blockwork, brickwork and masonry surfaces.
Features
- Colour matches concrete
- Develops very high strengths
- Non-shrink
- High bond strength to masonry surfaces, i.e. concrete, brick and block
- Very low water absorption when set
- Does not contain calcium chloride, therefore will not corrode anchor bolt and reinforcing steel
Quickcrete
Fast setting mortar - 15 minute set - just add water
Description
A mortar designed for jobs requiring a fast set and high strength. Ready to use, just add water, no other additives required.
Features
- Sealing plumbing pipes
- Setting toilet pans
- Grouting and patching
Rapid Set 45
Non-slump, fast set, patching and repair compound
Description
A fast setting, non-slump, cement patching and repair compound.
Features
- Develops high strength
- Low shrinkage
- Good bond to masonry surfaces
- Sets in 1 hour.
Reinforced Screed
Impact resistant flooring compound
Description
A premixed, fast setting, cement based resin modified screed. Blended with alkali resistant glass fibres and hard wearing aggregates to make a hard-wearing impact, crack and chemical resistant floor repair compound.
Features
- Controlled expansions, ensuring positive surface contact
- No corrosive effect caused by metallic residue
- No rusting or staining on exposed edges
- Premixed, addition of water only needed
