Prime all porous surfaces this stops the adhesive drying to quickly and gives you a clean dust free surface to adhere to. All primers are to be brushed or broom applied only, as this gives better penetration of the primer.

 Occasionally remove a tile to check that you are getting acceptable coverage. Do not leave crosses in floor and wall tiles as this leaves no room for movement.  Movement Joints should be placed around the perimeter and at 4.5 mtr spacing and around any posts or protrusions through the tiles. These movement joints are to be filled with a flexible sealant.

Alert:  Wax Residue on Porcelain Tiles                                                                                     Some porcelain have a wax residue on the face of the tile and as such must be removed prior to grouting, as we believe this is causing some grout discolouration.

Kemgrout Flexible is Ideal for Porcelain Tiles                                                                             As this is a non sanded grout, it can be used from 1mm to 5mm and comes in 20 colours.

Kemgrout Sanded                                                                                                                                   Is a fine sanded grout and can be used from 3mm to 10mm and comes in 10 colours.

Epegrout  Trade                                                                                                                                      Is an easy to use epoxy grout for joints from 2mm to 10mm and is available in 5 colours. 

Colour Seal                                                                                                                                         Water based Acrylic caulk that performs like a silicon, easy to use and clean up ,Highly flexible and available in 9 colours.